WP Platinum Archives

Latest Monthly Archives

  • March 2013
  • January 2010
  •  


    Latest Daily Archives

  • March 12, 2013
  • January 26, 2010
  • January 21, 2010
  • January 20, 2010
  • All Platinum Categories

  • Uncategorized
  •  


    All Platinum Tags

    Archive for the ‘Uncategorized’ Category

    Imasco Color Chart 1

    Posted on Thursday, January 21st, 2010

    CLICK ON IMAGE TO ENLARGE         PAGE 1 PAGE 2 PAGE 3 PAGE 4

    Posted in Uncategorized by | Comments Off

    Consolidated Gypsum

    Posted on Thursday, January 21st, 2010

    1-2-3-4-5

    Accessories
    #195176 DYNAMIC Drop Cloth 8’ x 12’
    #195188 DYNAMIC Drop Cloth 12’ x 15’
    #121525 Gloves Fisherman String Net L
    #105090 TIE Wire 16Ga 54mil for Mason
    #111283 AMAX Hydrosponge Float 7″ X 12″
    #111308 AMAX Replacement Sponge 3/Bag
    #111271 AMAX Sponge Float 5″ X 11″
    #120167 NYCON Control Fibers/Bag
    #130916 P.C. Starter Trac 1-1/2″ X 10′
    #110217 Scaffold Clip 100/Box
    #186165 SPEEDY-CLEAN Concrete Dissolve
    EIFS Tape
    #115293 Protecto EIFS Tape 4” x 100’
    #115394 Protecto EIFS Tape 6” x 100’
    #112982 Protecto Tape 4” x 100’
    Fiberglass Mesh Tape
    #110988 IMASCO Regular Mesh 38” 4.5OZ
    #113491 IMASCO Self-Adhesive Mesh 4” X 150’
    Stucco Tape
    #115166 CANTECH Stucco Tape 2” x 55m
    Sheathing Tape
    #110178 CANTECH Sheathing Tape 2-1/2″
    Window Protection Tape
    #115267 RESTO Blue Window Protective Tape

    Posted in Uncategorized by | Comments Off

    Consolidated Gypsum

    Posted on Thursday, January 21st, 2010

    1-2-3-4-5

    Tools
    #123125 T-RASP 360 EIFS Circle Rasp
    #132679 TRUE T. Wheel Barrow Poly Bin
    #129634 TRUE T. Wheel Barrow Steel Flat Free Tire
    #143951 WIND-L 12″ Flat Blade # Pack
    #143254 WIND-L Bucket Opener
    #196483 WIND-L Groove Sled 6″ Q-Sled 6
    #143975 WIND-L Groove Tool Soft Handle
    #145412 WIND-L Hot Knife Kit 2-ICFKIT
    #143456 WIND-L Hot Knife Table Replacement Wire 100′
    #143076 WIND-L Italian Float 2″ X 11″
    #143242 WIND-L Italian Float 5″ X 11″
    #144004 WIND-L SQ Groove Sled 3/4” X 3/4″
    #141680 WIND-L SQ Groove Hot knife Blade
    #140828 WIND-L Tiger Claw Dura Rasp 6″
    #144016 WIND-L UGZ EVERRASP 6″ X 14″
    #143987 WIND-L V Groove Sled 1/2″ X 1/2″
    #143999 WIND-L V Groove Sled 3/4″ X 3/4″
    #143052 WIND-L V-Groove Hot knife Blade 1/2
    #143064 WIND-L V-Groove Hot knife Blade 3/4
    #140599 WIND-L Wind Devil 2 Plates/Box
    #179704 MARSHALLTOWN Permashape Trowel 13″ X 5″
    #162026 MARSHALLTOWN Finish Trowel Stainless Steel 14″ X 4″
    #126880 KRAFT Caulking Trowel 1/2″
    #126854 KRAFT EIFS Notch Trowel 12″ X 5″
    #192360 KRAFT Elite 4-1/2″ X 11″ with Leather Handle
    #192372 KRAFT Elite 4-1/2″ X 11″ with Proform Handle
    #192358 KRAFT Elite 4-1/2″ X 11″ with Wood Handle
    #129824 KRAFT Elite 4-3/4″ X 11.5” with Leather Handle
    #192396 KRAFT Elite 4-3/4″ X 11.5″ with Proform Handle
    #192384 KRAFT Elite 4-3/4″ X 11.5″ with Wood Handle
    #192411 KRAFT Elite 5″ X 12″ with Leather Handle
    #192423 KRAFT Elite 5″ X 12″ with Proform Handle
    #192409 KRAFT Elite 5″ X 12″ with Wood Handle
    #192447 KRAFT Elite 5″ X 13″ with Leather Handle
    #192459 KRAFT Elite 5″ X 13″ with Proform Handle
    #192435 KRAFT Elite 5″ X 13″ with Wood Handle
    #127250 KRAFT Foam Text. Float PL602
    #132554 KRAFT Green Text. Float PL603
    #127096 KRAFT Inside EIFS Tool 3″ X 1″
    #127236 KRAFT Inside EIFS Tool 3″ X 2″
    #127185 KRAFT Inside EIFS Tool 3″X 1-1/2″
    #192536 KRAFT Magnesium Feather Edge 4-1/2″ X 4′
    #192548 KRAFT Magnesium Feather Edge 4-1/2″ X 6′
    #126929 KRAFT Margin Trowel 5″ X 1-1/2″
    #126993 KRAFT Margin Trowel 6″ X 2″
    #136778 KRAFT Margin Trowel 8″ X 2″
    #127034 KRAFT Outside EIFS Tool 3″ X 1″
    #127224 KRAFT Outside EIFS Tool 3″ X 2″
    #127147 KRAFT Outside EIFS Tool 3″ X 1-1/2″
    #131273 KRAFT Plexi-Plastic Trowel 11 X 4.5
    #127010 KRAFT Pointing Trowel 5-1/2″
    #126602 KRAFT Rasp 6″ X 14″ PL-520
    #126626 KRAFT Rasp 8″ X 14″ PL-514
    #126676 KRAFT Rasp Replacement Sheet 6″ X 14″
    #126703 KRAFT Rasp Replacement Sheet 8″ X 14″
    #127402 KRAFT Single Serrated Mag Darby 48″
    #126614 KRAFT Trowel Curved 4-1/2″ X 12
    #126688 KRAFT Trowel Stainless Steel 5″ X 12″

    Posted in Uncategorized by | Comments Off

    Consolidated Gypsum

    Posted on Thursday, January 21st, 2010

    1-2-3-4-5

    Lath / Bead / Flashings
    #109909 Bailey Stucco Window / Door Flashing 1-3/8″
    #109911 Bailey Stucco Window / Door Flashing 1-5/8″
    #109896 Bailey Stucco Window / Door Flashing 1″ X 10′
    #109923 Bailey Stucco Window / Door Flashing 2″ X 10′
    #110003 LATH Galvanized 1.75 Lb sheet 27” X 96″
    #110027 LATH Galvanized 2.5 Lb sheet 27″ X 96″
    #110041 LATH Galvanized 3.4 Lb sheet 27″ X 96″
    #110154 Stripite Galvanized 4″ X 200′
    #110166 Stripite Galvanized 6″ X 200′
    #110089 Perforated Plastertop 1/2″ X 10′ Reg
    #110104 Perforated Plastertop 3/4″ X 10′ Reg
    #110128 Perforated Plastertop 5/8″ X 10′ Reg
    #110661 Perforated Plastertop 5/8” X 10′ wide
    #128593 Perforated Plastertop Wide 3/4″ X 10
    #111637 “CEMCO” Cornerite 2″ X 2″ X 8′
    #111625 1-1/2″ Cornerite 8′ Metal Nose
    #171683 BAKOR Blueskin 12″ X 75′ 40MIL
    #122743 BAKOR Blueskin 36″ X 75′PF36 40MIL
    #123466 BAKOR Blueskin 6″ X 75′ 40MIL
    #116699 BAKOR Blueskin Primer 17L
    #129026 BAKOR Blueskin Primer 3.5L
    #132124 BAKOR Blueskin W.P. Membrane WP200
    #128909 BAKOR Weather Barrier 4″ X 75′ 25MIL
    #128911 BAKOR Weather Barrier 6″ X 75′ 25MIL
    #109226 Expanded Joint Solid Wing 1/2″ X10′
    #120612 Expanded Joint Solid Wing 3/4″ X10′
    #144559 KWIK Corner 10′ No Plastic Nose
    #158128 KWIK Corner 8′ No Plastic Nose
    Stucco Wire
    #110320 IMASCO STRUCTA Corner Straight10′
    #110205 Stucco Wire 54″ T Island 2″ 16Ga
    #123000 Stucco Wire 54″ S. Lath 1.5″ 17Ga
    Mortar Mixers
    #137819 CROWN Mixer 10S-GH9 with Tongue
    #120751 CROWN Mixer 8S-GH9 with Tongue
    Mouldings
    #116992 WESTMOULD DA-003 1″ X 3″ X 8′
    #117007 WESTMOULD DA-004 1″ X 4″ X 8′
    #111699 WESTMOULD DB-004 1-1/2” X 4″ X 8′
    #111675 WESTMOULD DB-004M 1-1/2” X 4″ X 8′
    #111815 WESTMOULD DB-004SL 1-1/2” X 4″ X 8′
    #111738 WESTMOULD DB-006 1-1/2” X 6″ X 8′
    #115089 WESTMOULD DB-006DF 1-1/2” X 6″ X 8′
    #111726 WESTMOULD DB-006M 1-1/2” X 6″ X 8′
    #111839 WESTMOULD DB-006SL 1-1/2” X 6″ X 8′
    #111752 WESTMOULD DB-008 1-1/2” X 8″ X 8′
    #111740 WESTMOULD DB-008M 1-1/2” X 8″ X 8′
    #111853 WESTMOULD DB-008SL 1-1/2” X 8″ X 8′
    #117095 WESTMOULD DB-010 1-1/2” X 10″ X 8′
    #113960 WESTMOULD DB-010M 1-1/2” X 10″ X 8′
    #117021 WESTMOULD DB-010SL 1-1/2” X 10″ X 8′
    #117108 WESTMOULD DB-012 1-1/2” X 12″ X 8′
    #113996 WESTMOULD DB-012M 1-1/2” X 12″ X 8′
    #117033 WESTMOULD DB-012SL 1-1/2” X 12″ X 8′
    #117071 WESTMOULD DC-006 2″ X 6″X 8′
    #168422 WESTMOULD Keystone KY-008 4″ X 8″
    #168294 WESTMOULD Keystone KY-008M 4″ X 8″
    #168434 WESTMOULD Keystone KY-010 5″ X 10″
    #115368 WESTMOULD Window Trim WT-004
    #112665 WESTMOULD WT-002 2″ X 6″ X 8′
    #117045 WESTMOULD WT-008 4″ X 6″ X 8′

    Posted in Uncategorized by | Comments Off

    Consolidated Gypsum

    Posted on Thursday, January 21st, 2010

    1-2-3-4-5

    Sand
    #116586 IMASCO #20 Dolomite SAND 40Kg
    #116574 IMASCO #00 Dolomite SAND 40Kg
    #122298 Stucco Sand Washed 1/2 Cubic Yard
    #116738 Spanish Trowel 40KG
    Lime
    #130699 CHEMSTAR Type S Lime 50 Lbs
    #129038 Hydrated Lime 20Kg/Bag Type N
    #188436 Lime Substitute – 25Kg Bag
    Lime Stucco Finishes
    #198627 OMEGA Bel Marmo Lime Finish 5Gal.
    #197536 OMEGA Tadalakt Lime Finish 1Gal.
    #198639 OMEGA Tadelakt Lime Finish 5Gal.
    #198653 OMEGA Valentino Mineral Primer 5Gal.
    #198792 OMEGA Valentino TopCoat Brown
    #198780 OMEGA Valentino TopCoat Clearwax
    #198588 OMEGA Venezia Lime Finish 1Gal.
    #198641 OMEGA Venezia Lime Finish 5Gal.
    Stucco Specialty Tools
    #198867 OMEGA 8″ Hawk
    #198879 OMEGA SS Spec. Trowel 280 X 120
    #198829 OMEGA SS Trowel 200 X 80
    #198831 OMEGA SS Trowel 240 X 100
    Plaster
    #129723 CERTAINTEED Agricultural Gypsum 25Kg
    Additives
    #151097 HOSTAPUR Mortar Additive 500gr
    Fasteners
    #112499 GRIDMATE Hi-Lo Screw 2.5″ 2.5M
    #113528 GRIDMATE Hi-Lo Screw 3″ 100Pc
    #112475 GRIDMATE Hi-Lo Screw 4″ 1M
    #111714 GRIDMATE PB Plates 2″ 1M/Case
    #111702 GRIDMATE Plates 1-3/4″ 1M/Case
    #125838 Staple 1-1/2″ Crown 54MIL 10M
    #188094 Staple 3/8” Crown 21Ga 10M
    Building Papers
    #142745 TYPAR 9′ X 100′ 900Sq. ft./Roll
    #110142 HALTEX 20 Building Paper 120′
    #110130 HALTEX 30 Building Paper 120′
    #103096 HALTEX 30Lb 44″ Felt Asphalt
    #155259 HALTEX 60 Building Paper 90′
    #125321 TYVEK 18″ X 100′ 150Sq. ft./Roll
    #142682 TYVEK 3′ X 100′ 300Sq. ft./Roll
    #161339 TYVEK CGS 9′ X 100′ Homewrap
    EIFS Insulation
    #139178 TYPE 1 EIFS Foam Board 0.75″
    #139180 TYPE 1 EIFS Foam Board 1″
    #139205 TYPE 1 EIFS Foam Board 1.5″
    #139217 TYPE 1 EIFS Foam Board 2″
    #139229 TYPE 1 EIFS Foam Board 3″
    #139231 TYPE 1 EIFS Foam Board 4″

    Posted in Uncategorized by | Comments Off

    Stucco

    Posted on Wednesday, January 20th, 2010

    Stucco or render is a material made of an aggregate, a binder, and water. Stucco is applied wet and hardens to a very dense solid. It is used as a coating for walls and ceilings and for decoration. Stucco may be used to cover less visually appealing construction materials such as concrete, cinder block, or clay brick and adobe

    Stucco Composition

    The difference in nomenclature between stucco, plaster, and mortar is based more on use than composition. Until the later part of the nineteenth century, it was common that plaster, which was used inside a building, and stucco, which was used outside, would consist of the same primary materials: lime and sand (which are also used in mortar). Animal or plant fibers were often added for additional strength. In the later part of the nineteenth century, Portland cement was added with increasing frequency in an attempt to improve its durability. At the same time, traditional lime plasters were being replaced by gypsum plaster. Stucco used as an exterior coating on a residential building. Traditional stucco is made of lime, sand, and water. Modern stucco is made of Portland cement, sand, and water. Lime is added to decrease the permeability and increase the workability of modern stucco. Sometimes additives such as acrylics and glass fibers are added to improve the structural properties of the plaster. This is usually done with what is considered a one-coat stucco system, as opposed to the traditional three-coat method. Lime stucco is a relatively hard material that can be broken or chipped by hand without too much difficulty. The lime itself is usually white; color comes from the aggregate or any added pigments. Lime stucco has the property of being self-healing to a limited degree because of the slight solubility of lime (which in solution can be deposited in cracks. where it solidifies). Portland cement stucco is very hard and brittle and can easily crack if the base on which it is applied is not stable. Typically its color was gray, from the innate color of most Portland cement, but white Portland cement is also used. Today’s stucco manufacturers offer a very wide range of colors that can be mixed integrally in the finish coat.

    Traditional Stucco

    As a building material, stucco is a durable, attractive, and weather-resistant wall covering. It was traditionally used as both an interior and exterior finish applied in one or two thin layers directly over a solid masonry, brick or stone surface. The finish coat usually contained an integral color and was typically textured for appearance. Then with the introduction and development of heavy timber and light wood-framed construction methods, stucco was adapted for this new use by adding a reinforcement lattice, or lath, attached to and spanning between the structural supports and by increasing the thickness and number of layers of the total system. The lath added support for the wet plaster and tensile strength to the brittle, cured stucco; while the increased thickness and number of layers helped control cracking. The traditional application of stucco and lath occurs in three coats — the scratch coat, the brown coat and the finish coat. The two base coats of plaster are either hand-applied or machine sprayed. The finish coat can be toweled smooth, hand-textured, floated to a sand finish or sprayed. Originally the lath material was strips of wood installed horizontally on the wall, with spaces between, that would support the wet plaster until it cured. This lath and plaster technique became widely used. In exterior wall applications, the lath is installed over a weather-resistant asphalt-impregnated felt or paper sheet that protects the framing from the moisture that can pass through the porous stucco. Following World War II, the introduction of metal wire mesh, or netting, replaced the use of wood lath. Galvanizing the wire made it corrosion resistant and suitable for exterior wall applications. At the beginning of the 21st century, this “traditional” method of wire mesh lath and three coats of exterior plaster is still widely used. In some parts of the United States (California, Arizona, New Mexico and Florida), stucco is the predominant exterior for both residential and commercial construction. Baroque stucco decorations of the main nave of the Bright Mount Monastery basilica, 1693-1695.[1]Stucco has also been used as a sculptural and artistic material. Baroque and Rococo architecture makes heavy use of stucco. Examples can be found in churches and palaces, where stucco is mostly used to provide a smooth, decorative transition from walls to ceiling, decorating and giving measure to ceiling surfaces. Stucco is an integral part of the art of belcomposto, the Baroque concept that integrates the three classic arts, architecture, sculpture, and painting. Since stucco can be used for decoration as well as for figurative representation, it provides an ideal transitive link from architectural details to wall paintings such as the typically Baroque trompe l’oeil ceilings, as in the work of the Wessobrunner School. Here, the real architecture of the church is visually extended into a heavenly architecture with a depiction of Christ, the Virgin Mary or the Last Judgment at the center. Stucco is used to form a semi-plastic extension of the real architecture that merges into the painted architecture. Islamic art makes use of stucco as a decorative means in mosques and palaces. Indian architecture knows stucco as a material for sculpture in an architectural context. It is rare in the countryside. Because of its “aristocratic” appearance, Baroque-looking stucco decoration was used frequently in upper-class apartments of the 19th and early 20th century. Beginning in the 1920s, stucco, especially in its Neo-Renaissance and Neo-Baroque materialization, became increasingly unpopular with modern architects in some countries, resulting in a widespread movement to remove the stucco from tenements. Stucco was still employed in the 1950s in molded forms for decorating the joints between walls and ceilings inside houses. It was generally painted the same color as the ceiling and used in designs where a picture rail or rat rail was in use.

    Modern Stucco

    Modern stucco is an exterior cement plaster wall covering. It is usually a mix of sand, Portland cement, lime and water, but may also consist of a proprietary mix of additives including fibers and synthetic acrylics that add strength and flexibility. Modern synthetic stucco can be applied as one base layer and a finish layer, which is thinner and faster to apply, compared to the traditional application of three-coat stucco.As with any cement-based material, stucco must be reinforced to resist movement cracking. Plastic or wire mesh lath, attached with nails or screws to the structural framing, is embedded into the base coat to provided stiffening for the stucco. One method often used to help conceal the smaller surface cracks that may appear is the application of one of a variety of pre-mixed acrylic finishes. Flexible acrylic finishes have the ability to stretch and bridge over cracks, improving appearance and limiting the passage of moisture behind the stucco. Where stucco is to be applied to a structure of wood-framing or light-gauge steel framing, the framing is protected from moisture damage by applying a vapor-permeable, water-resistant weather barrier; typically an asphalt-saturated paper or one of a variety of manufactured plastic-based sheets, known as “building wraps” or “stucco wraps”. The properties of the weather barrier must not only protect the framing from rain and moisture, but at the same time allow the free passage of any water vapor generated inside the building to escape through the wall.A wide variety of stucco accessories, such as weep screeds, control and expansion joints, corner-aids and architectural reveals are sometimes also incorporated into the lath. Wire lath is used to give the plaster something to attach to and to add strength. Types include expanded-metal lath, woven-wire lath, and welded-wire lath. The first layer of plaster is called a “scratch coat,” consisting of plastic cement and sand. A brush is used to scratch the surface horizontally or in a crisscross pattern to provide a key for the second layer. The first coat is allowed to dry (cure) before the second layer is applied. The next layer is called the “brown coat” or leveling coat. It also consists of sand, cement, and lime. It is leveled with tools called “darbies,” “rods,” and “federeges,” scraped smooth, and floated to provide a smooth, even surface onto which the finish coat is applied. It is then allowed to dry (cure) for 7-10 days minimum to allow “checking” (shrinkage) and cracking to take place. If applied during very dry weather, the layers of stucco are sprayed with water for one or more days to keep a level of moisture within the stucco while it cures, a process known as “moist curing.” If the stucco dries too soon, the chemical hardening (“hydration”) will be incomplete, resulting in a weaker and brittler stucco. The final, exterior layer is the final layer is the “finish coat,” of which there are two recommended types: 1. Color Coat is a colored sand, cement, and lime mixed finish and is typically 3 mm (1/8″) thick. It is applied over the second coat (brown coat) and can be floated with water for a sandy finish or textured over with a trowel to create various styles of finishes. Premixed, bagged stucco is gaining in use and is available in coarse graded sand and finer graded sand for creating a variety of toweled finishes; it is available in a variety of colors. 2. Acrylic Finish is an acrylic-based finish from 1.0 mm to 4.0 mm thick. It can be applied in many ways; it is the most recommended finish for long-lasting quality. It also can be ordered in any color. (Hard Coating is another method of adding a finish to the stucco wall, although no longer recommended. In the 1960s and 1970s people added a variety of materials like glass chunks, stones or marble into the wet stucco wall. This kind of finish coat is very heavy and inflexible and is hard to repair.)

    Stucco Siding

    Stucco is valued as a siding material for its attractiveness and durability–portland cement can last indefinitely without requiring maintenance. It is often (but certainly not limited to) use on Spanish-style homes. Stucco can be directly applied to brick and concrete, or applied to a lath (paper or wire mesh) over wood frame or other material. While nothing prevents anyone from painting stucco or white-washing it with cement, these materials generally do not adhere to stucco longer than two or three years, requiring constant re-application. Removing these materials in order to re-stucco requires expensive sandblasting. Paint also prevents the concrete from breathing. A stucco home can be re-stuccoed with a plaster that has the desired pigment added

    Posted in Uncategorized by | Comments Off

    PAINTING

    Posted on Wednesday, January 20th, 2010

    Latex or Oil-Base Paint

    Latex paints have been improved a great deal since they first became popular in the 1960′s. Some modern latex paints are actually better than oil based paints for home interior and exterior surfaces. It’s important to choose the right kind of paint for your job.

    Flat Latex Paint is fine for interior walls and hides surface irregularities well. Some brands offer one for walls and one for ceilings, but I always use wall paint. Can be cleaned, but in high traffic areas, and in kitchens and bathrooms, use Semi-Gloss Latex Enamel.
    Semi-Gloss Latex Enamel is fine for trim, cabinets, laundry room, bathroom, kitchen, kid’s rooms, and anywhere that a semi-gloss finish is wanted. It is very scrabble, and somewhat water-resistant.
    Acrylic Latex Paint is designed for exterior use and comes in flat, semi-gloss, and high-gloss finishes. One of the benefits of using latex outdoors is that it is more flexible and “moves” as the surface heats and cools, instead of cracking or blistering.
    Primers made for interior or exterior use are available in latex and oil. When painting over oil paint, oil primers work well with latex paint. If you’re painting metal, after sanding, wipe with turpentine and apply an oil primer before painting with latex. For new work, use latex primer and paint.
    Oil-Based Paint no longer has lead. The vehicle is usually linseed oil and turpentine, with other chemicals and coloring. For special applications, oil paint is great. For example, to get a flawless finish on a door, gloss oil paint with a small amount of linseed oil added will leave a mirror-smooth finish if applied properly.
    Stains:
    True stains are designed to stain the wood to add color. Other types of stains are more like paint — they let the texture of wood show through, and sometimes let some of the wood color show through, but usually provide less protection than paint.
    Often doors, trim, and furniture are given a true wood finish by using a true stain. The stain is applied then rubbed off to leave only the softer grains colored, finishing with a sealer like varnish or polyurethane.
    Varnish & Polyurethane:
    These are similar in what they do but are made of very different materials. Varnish tends to yellow and is not as long lasting as polyurethane. Where I live, you can’t even buy varnish anymore. These come in satin and gloss finishes. Polyurethane also comes in a high gloss finish that looks like glass when several layers are applied. Not for outdoor use.
    Shellac:
    This is an alcohol-based paint or sealer. It is seldom used in homes, but I mention it here because it makes a good primer for plaster that has had water damage and a brownish discoloring is bleeding through. It also helps stop light crumbling of plaster.
    KILZ — Special Primer:
    This helps cover stubborn stains, grease, graffiti, plaster stains, and other problem surfaces. Used before primer and paint, this will cover almost every kind of stain that bleeds through.
    Epoxy Paint:
    This is a very special paint used for extreme durability and waterproofing. It is two-part paint — one can have the pigment and vehicle and the other can have the catalyst and hardener. After mixing, it must be used within eight hours. Sometimes, this time can be extended if refrigerated below 40 (f) degrees. Very scrabble and works well in showers and around pools. Extremely hazardous to use without proper ventilation and/or breathing device.

    Posted in Uncategorized by | Comments Off